Products: Fluting, liner, semi kraft liner, possibly white top liner
GSM range: 80-140 g/sq meter (headbox suitable for 40-160 gsm)
Operating speed: 240 m/min
with press section upgrade 350 m/min
with addition of 2 dryers 400 m/min
Technical documentation: included as far as available
Spare parts: included as far as available
Condition: very good condition
Status: Erected, stopped
List of Equipment:
Inclined conveyor for waste paper with wire coiler Sicma. Main pulper D-type 16m3 chest volume, made by DGI. Equipped with inclined screw for residues removal, periodical rejects separator Maule (2009) and dewatering press for sludge thickening. Crane for removal of residues from pulper chest.
Standby pulper 12m3 chest volume.
HD cleaner with automatic reject discharge.
Coarse screen Maule Separplast – combination of centrifugal clener with screen basket and rotor
Stainless steel tank with pump and agitator.
Stainless steel tank 120 m3 with pump and agitator.
Pressure screen Celleco Alfa Laval 1,8mm holes
Pressure screen Celleco Alfa Laval 0,3mm slots
Fractionator with Celleco Alfa Laval 0,15mm slots
2x vibrating screen.
Hot disperger plant Maule (1996) dismantled and out of operation.
Starch cooker BVG for application of starch into stock.
4-stage cleaner station GLV (1st stage: 18 cleaners type Cleanpac 700, 2nd stage: 15 cleaners type Cleanpac 270, 3rd stage: 4 cleaners type Cleanpac 700, last stage with Fibermizer)
Paper machine:
Pressurized headbox VAS (New in 2005). Lip width 2660mm. Design speed 600 m/min. automatic profile control with 20 lip adjusters.
Wire part with wire lenght 29m x 285 cm (11,3m breast roll to couch roll. Wire shaker installed on breast roll.
Secondary headbox installed directly on wire table. Lip width 2600mm, closed type with two defloculation rolls. Manual control of profile.
Press section comprising of 3 straight presses:
1st press suction roll 800mm dia against 500mm dia roll.
2nd press: two rolls 550mm dia.
3rd smoothing press: two rolls cca 400mm dia.
Equipment for cross profile moisture control (made by VIB) installed on 1st press.
Dryer section comprises of 18pcs Drying cylinders Bertrams, face width 2790mm, 4 bar operating pressure.
Two roll calender Hunt+Moscrop
Pope reel for 1,5m diameter reels (3,8t reel width)
Complete vacuum system comprising of 4x vacuum pumps (Nash, Cutes NN2001), silencers, water separators.
Steam and condensate system
Slitter rewinder
Auxilliaries:
Steam boiler Loos, capacity 10 ton/hour at 12 bar pressure. Fuelled by heavy oil.
Transformers: 2x transformers 1000 kVA for PM, 1x transformer Schneider 1600 kVA for stock prep (new in 2008).